Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT-20021028-JPSNAP #0: Sun Oct 27 23:29:03 GMT 2002 root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc06a9000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06a90a8. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 2391146060 Hz CPU: Pentium 4 (2391.15-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf27 Stepping = 7 Features=0xffffffffbfebfbff> real memory = 1073156096 (1048004K bytes) avail memory = 1033613312 (1009388K bytes) Initializing GEOMetry subsystem Pentium Pro MTRR support enabled npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard Using $PIR table, 9 entries at 0xc00feae0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_cpu0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci0: on pcib0 agp0: mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: at device 1.0 on pci0 pci1: on pcib1 pci1: at device 0.0 (no driver attached) uhci0: port 0xff80-0xff9f irq 11 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: CASIO product 0x4002, rev 1.10/1.00, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: port 0xff60-0xff7f irq 10 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xff40-0xff5f irq 9 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 ---- initial configuration ------------------------ ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- pci2: on pcib2 cbb0: at device 9.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb: Unable to map IRQ... device_probe_and_attach: cbb0 attach returned 12 pci2: at device 10.0 (no driver attached) pci2: at device 10.1 (no driver attached) em0: port 0xdcc0-0xdcff mem 0xff6e0000-0xff6fffff irq 9 at device 12.0 on pci2 em0: Speed:100 Mbps Duplex:Half isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) fdc0: port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold plip0: on ppbus0 lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 orm0: