---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p3 NOMADBSD i386
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(vga): text 80x25
CPU: Intel(R) Core(TM) CPU Z520   @ 1.33GHz (1330.02-MHz 686-class CPU)
  Origin="GenuineIntel"  Id=0x106c2  Family=0x6  Model=0x1c  Stepping=2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40c3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
  AMD Features=0x100000<NX>
  AMD Features2=0x1<LAHF>
  VT-x: HLT,PAUSE
  TSC: P-state invariant, performance statistics
real memory  = 1073741824 (1024 MB)
avail memory = 1006415872 (959 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <072009 APIC1443>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 hardware threads
random: unblocking device.
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1330019350 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0x15f83a0, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <IECOEM KOHJINSH> on motherboard
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
acpi_ec0: <Embedded Controller: GPE 0xd> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe880-0xe887 mem 0xdff80000-0xdfffffff,0xd0000000-0xd7ffffff,0xdff60000-0xdff7ffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
hdac0: <Intel SCH HDA Controller> mem 0xdff5c000-0xdff5ffff irq 16 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1: Failed to allocate interrupt for PCI-e events
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pcib2: [GIANT-LOCKED]
uhci0: <UHCI (generic) USB controller> port 0xe480-0xe49f irq 19 at device 29.0 on pci0
uhci0: LegSup = 0x0000
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <UHCI (generic) USB controller> port 0xe080-0xe09f irq 19 at device 29.1 on pci0
uhci1: LegSup = 0x0000
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <UHCI (generic) USB controller> port 0xef00-0xef1f irq 19 at device 29.2 on pci0
uhci2: LegSup = 0x0000
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdff5bc00-0xdff5bfff irq 19 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel SCH UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_syscontainer0: <System Container> on acpi0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0
fdc0: No FDOUT register!
ppc0: parallel port not found.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC262 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC262 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC262 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen2.1: <Intel UHCI root HUB> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK6028GAL BN101A> ATA-7 device
ada0: Serial Number 795HW423W
ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes)
ada0: 57231MB (117210240 512 byte sectors)
Trying to mount root from ufs:/dev/gpt/nomadroot [rw,noatime]...
battery0: critically low charge!
GEOM: ada0s1: invalid disklabel.
uhub2: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
GEOM: diskid/DISK-795HW423Ws1: invalid disklabel.
Root mount waiting for: usbus3
Root mount waiting for: usbus3
Root mount waiting for: usbus3
uhub0: 8 ports with 8 removable, self powered
Root mount waiting for: usbus3
Root mount waiting for: usbus3
ugen3.2: <ELECOM MF-LSU2> at usbus3
umass0 on uhub0
umass0: <ELECOM MF-LSU2, class 0/0, rev 2.00/11.00, addr 2> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:1:0: Attached to scbus1
da0 at umass-sim0 bus 0 scbus1 target 0 lun 0
da0: <ELECOM MF-LSU2 1100> Removable Direct Access SPC-2 SCSI device
da0: Serial Number 2231721302040783
da0: 40.000MB/s transfers
da0: 7667MB (15702912 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
Root mount waiting for: usbus3
ugen3.3: <Planex Communications Inc. GW-USNANO2> at usbus3
Root mount waiting for: usbus3
ugen3.4: <Ralink 802.11 n WLAN> at usbus3
ugen0.2: <DIALOGUE INC PenMount USB> at usbus0
Root mount waiting for: usbus3
ugen3.5: <ASIX Elec. Corp. AX88x72A> at usbus3
Root mount waiting for: usbus3
ugen2.2: <PIXELA CORPORATION PIX-ST143> at usbus2
ugen3.6: <vendor 0x04b4 product 0x6560> at usbus3
uhub4 on uhub0
uhub4: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 6> on usbus3
Root mount waiting for: usbus3
uhub4: 4 ports with 4 removable, self powered
ugen3.7: <vendor 0x0a12 product 0x0001> at usbus3
Root mount waiting for: usbus3
ugen3.8: <FOXLINK FO33AF-191> at usbus3
WARNING: /: TRIM flag on fs but disk does not support TRIM
WARNING: /home: TRIM flag on fs but disk does not support TRIM
acpi_video0: <ACPI video extension> on vgapci0
Cuse v0.1.35 @ /dev/cuse
lo0: link state changed to UP
rtwn0 on uhub0
rtwn0: <Planex Communications Inc. GW-USNANO2, class 0/0, rev 2.00/2.00, addr 3> on usbus3
rtwn0: MAC/BB RTL8188CUS, RF 6052 1T1R
run0 on uhub0
run0: <1.0> on usbus3
run0: MAC/BBP RT3070 (rev 0x0200), RF RT3020 (MIMO 1T1R), address 00:25:d3:40:19:f4
ums0 on uhub1
ums0: <EndPoint1 Interrupt Pipe> on usbus0
axe0 on uhub0
axe0: <0> on usbus3
ubt0 on uhub4
ubt0: <vendor 0x0a12 product 0x0001, class 224/1, rev 2.00/31.64, addr 7> on usbus3
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 00:1e:33:18:af:64
ums0: error reading report description
device_attach: ums0 attach returned 12
ums0 on uhub1
ums0: <EndPoint1 Interrupt Pipe> on usbus0
ums0: error reading report description
device_attach: ums0 attach returned 12
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ue0: link state changed to DOWN