---<>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p3 r346458 NOMADBSD amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): text 80x25 CPU: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz (1995.05-MHz K8-class CPU) Origin="GenuineIntel" Id=0x6fa Family=0x6 Model=0xf Stepping=10 Features=0xbfebfbff Features2=0xe3bd AMD Features=0x20100800 AMD Features2=0x1 VT-x: HLT,PAUSE TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 2001219584 (1908 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) random: unblocking device. Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20181003/tbfadt-748) Firmware Warning (ACPI): Optional FADT field Gpe1Block has valid Address but zero Length: 0x000000000000102C/0x0 (20181003/tbfadt-796) ioapic0: Changing APIC ID to 1 ioapic0 irqs 0-23 on motherboard Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f86a0, 0) error 19 nexus0 vtvga0: on motherboard cryptosoft0: on motherboard acpi0: on motherboard CPU1: local APIC error 0x40 CPU0: local APIC error 0x40 acpi_ec0: port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 atrtc0: port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: on acpi0 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 vgapci0: port 0x1800-0x1807 mem 0xf8000000-0xf80fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 agp0: aperture size is 256M, detected 7676k stolen memory vgapci0: Boot video device vgapci1: mem 0xf8100000-0xf81fffff at device 2.1 on pci0 em0: port 0x1840-0x185f mem 0xf8200000-0xf821ffff,0xf8225000-0xf8225fff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: 00:16:d3:cc:09:83 em0: netmap queues/slots: TX 1/1024, RX 1/1024 uhci0: port 0x1860-0x187f irq 20 at device 26.0 on pci0 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: port 0x1880-0x189f irq 21 at device 26.1 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 ehci0: mem 0xf8426c00-0xf8426fff irq 22 at device 26.7 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 usbus2: 480Mbps High Speed USB v2.0 hdac0: mem 0xf8220000-0xf8223fff irq 17 at device 27.0 on pci0 pcib1: irq 20 at device 28.0 on pci0 pcib1: [GIANT-LOCKED] pcib2: irq 21 at device 28.1 on pci0 pcib2: [GIANT-LOCKED] pci1: on pcib2 iwn0: mem 0xf7f00000-0xf7f01fff irq 17 at device 0.0 on pci1 uhci2: port 0x18a0-0x18bf irq 16 at device 29.0 on pci0 usbus3 on uhci2 usbus3: 12Mbps Full Speed USB v1.0 uhci3: port 0x18c0-0x18df irq 17 at device 29.1 on pci0 usbus4 on uhci3 usbus4: 12Mbps Full Speed USB v1.0 ehci1: mem 0xf8427000-0xf84273ff irq 19 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 usbus5: 480Mbps High Speed USB v2.0 pcib3: at device 30.0 on pci0 pci2: on pcib3 cbb0: mem 0xd7eff000-0xd7efffff irq 16 at device 0.0 on pci2 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pci2: at device 0.1 (no driver attached) sdhci_pci0: mem 0xd7efe400-0xd7efe4ff irq 18 at device 0.2 on pci2 sdhci_pci0: 1 slot(s) allocated isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18e0-0x18ef at device 31.1 on pci0 ata0: at channel 0 on atapci0 ahci0: port 0x1c30-0x1c37,0x1c24-0x1c27,0x1c28-0x1c2f,0x1c20-0x1c23,0x1c00-0x1c1f mem 0xf8426000-0xf84267ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.10 with 3 3Gbps ports, Port Multiplier not supported ahcich0: at channel 0 on ahci0 ahcich2: at channel 2 on ahci0 acpi_tz0: on acpi0 acpi_tz1: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 battery0: on acpi0 acpi_acad0: on acpi0 orm0: at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xe0000-0xeffff pnpid ORM0000 on isa0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff pnpid PNP0900 on isa0 est0: on cpu0 Timecounters tick every 1.000 msec hdacc0: at cad 0 on hdac0 hdaa0: at nid 1 on hdacc0 pcm0: at nid 18,17 and 28,20,21 on hdaa0 hdacc1: at cad 1 on hdac0 unknown: at nid 2 on hdacc1 (no driver attached) ugen3.1: at usbus3 uhub0: on usbus3 ugen5.1: at usbus5 uhub1: on usbus5 ugen1.1: at usbus1 uhub2: on usbus1 ugen2.1: at usbus2 uhub3: on usbus2 ugen0.1: at usbus0 uhub4: on usbus0 ugen4.1: at usbus4 uhub5: on usbus4 ada0 at ahcich0 bus 0 scbus1 target 0 lun 0 ada0: <2710DCS23-240 R0522A0> ACS-2 ATA SATA 3.x device ada0: Serial Number 09032218W0509 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 228936MB (468862128 512 byte sectors) cd0 at ata0 bus 0 scbus0 target 0 lun 0 cd0: Removable CD-ROM SCSI device cd0: Serial Number HC43 120920 cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present Trying to mount root from ufs:/dev/gpt/nomadroot [rw,noatime]... Root mount waiting for: cbb0 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0 uhub0: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered Root mount waiting for: usbus5 usbus2 uhub3: 4 ports with 4 removable, self powered uhub1: 4 ports with 4 removable, self powered Root mount waiting for: usbus5 usbus2 ugen5.2: at usbus5 umass0 on uhub1 umass0: on usbus5 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:3:0: Attached to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: Removable Direct Access SPC-4 SCSI device da0: Serial Number AA00000000000489 da0: 40.000MB/s transfers da0: 30720MB (62914560 512 byte sectors) da0: quirks=0x2 ugen2.2: at usbus2 uhub6 on uhub3 uhub6: on usbus2 uhub6: MTT enabled ugen0.2: at usbus0 Root mount waiting for: usbus2 uhub6: 4 ports with 4 removable, self powered WARNING: /: TRIM flag on fs but disk does not support TRIM ugen0.3: at usbus0 WARNING: /home: TRIM flag on fs but disk does not support TRIM acpi_video0: on vgapci0 Cuse v0.1.35 @ /dev/cuse wlan0: Ethernet address: 00:13:e8:8e:96:d7 lo0: link state changed to UP iwn0: iwn_read_firmware: ucode rev=0xe43d0218 iwn0: iwn_read_firmware: ucode rev=0xe43d0218 wlan0: link state changed to UP ubt0 on uhub4 ubt0: on usbus0 WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() ichwd0: on isa0